The best cover for your 2020 Highland Ridge Mesa Ridge MF384RLS that you have is the Adco Aquashed part # 290-52258 which is the correct size, is the easiest to install, and offers the best protection in winter climates. view full answer...
For a lift kit that will add 2-1/4" inches of height to your 2017 Highland Ride Roamer 367BHS you'd want the tandem lift kit part # RR23QX. This will fit your Lippert 7k axles and will make it easier to level your trailer. view full answer...
We have 50 amp to 50 amp extension cords like the part # A10-5025E which is 25 feet long and has 90 degree connectors on each end. I am not sure what length you are looking for but I attached a link to a page that has all of the options we have which there are several options. view full answer...
The tandem axle lift kit part # RR23QX that you referenced will raise your suspension height 2 inches but looking at your trailer it looks like the leaf springs are pretty flat and in need of replacing. That will give you some additional height as well since new ones won't be nearly as flat. If you can get me the axle capacity of your trailer as well as the length of your current springs I can help you pick that out as well. view full answer...
The Trailair Flex Air 5th Wheel Pin Box part # LC328492 is designed to replace a Lippert 1621 pin box. Therefore, it will have have about the same overall dimensions as the pin box it replaces. This will be the case for pretty much any pin box which replaces a Lippert 1621 pin box. If you are trying to lower the nose of the trailer and have made all the adjustments you can to the pin box/hitch, the only option is to raise the trailer which I recommend using the Tandem Axle Lift Kit part... view full answer...
Go To Results